DIY Cardboard Laptop Stand and How To Make It Hard Like Wood

Things needed :

For the Stand

1. Cardboard ( I used balikbayan box)

2. cutter/slicer (better the scissors) 

3. ruler

4. pen

For Hardening

1. PVA glue/ wood glue/elmers

2. brush

3. cup

4. spoon

5. water

6. newspaper

Procedure :

For the Stand

Step 1 : Draw a pattern. You may adjust the height according to your preferences. 

Step 2 : Cut it out using your cutter. 

Step 3 : Assemble the parts to make a stand. 

For Hardening

Step 1 : Mix glue and water. The ratio is 1:1. You may start with a little portion to avoid waste. 

Step 2 : Place your stand on the newspaper to avoid a mess. 

Step 3 : Apply the mixture on the top side. Let it dry. Then apply on the back side.

Step 4 : Make another mixture but this time, 2 parts of glue and 1 part of water

Step 5 : Apply the mix on the top side of the stand. Let it dry.

Step 6 : Apply another 1:1 mixture. Let it dry and enjoy your DIY stand.